One set including controller ECW-XZ3 and load sensor ECW-GB(Tension
Application Range Being applicable to all traction elevators with fixed car platform
with the load of 500kg~3000kg
Landing Compensation Method Auto adapting intelligent fuzzy compensation
Sensitivity Elevator Rated Capacity/200 (Example: The rated capacity is
1000kg, and the
sensitivity is 5kg ) [This data may be affected by elevator
System Error ≤0.5% (5~40 centigrade )
Output Mode 1.2-channel programmable output modes are: No load, light load, semi
full load, heavy load, rated
load, overload (customer may set the changing range freely).
2.Each channel can be programmed as dynamic Close or Open contact.
3.Contact Capacity: DC/AC 48V/100mA.
Analogue output :It performs linear change (0~10V) when Elevator
load is changing
from “no load~rated load”.
Operation Ambient Temperature -20~55 centigrade centigrade
Relative Humidity Reaction 20%~90%RH
Reaction Time ≤0.3Second
Power Supply AC/DC24(±10%)V/200mA
Install Position Sensor Section:At the place of traction rope shackle
Controller Section:Control Cabinet in machineroom. See the attached
figure for installing dimensions.
Overall Size Sensor Section:See the figure;Controller Section:See the figure
The intension exceeding the limit parameters listed above may
result in the abnormality or permanent damage to the system.
1.Selecting directly-compressing“Disc”type load sensor,it is
unnecessary to change the pull rod of traction rope shackle.
2.Weighing range is wide (effective load of 500Kg~3000
Kg),high-accuracy position,intelligent temperature
4.Inner core consists of highly accurate load sensor and high
performance single-chip micro-computer. All operation
5.parameters can be set on field.
6.System may do scientific calculation according to mathematical
equations with the function of no-load auto
7.zeroing,automatically modifying measuring error.
8.The capability of fuzzy compensation improves the requirement of
elevator for high accuracy weighing signals.
9.Being provided with load setting or 20% or 100 rated load
autotuning sub-function under the
10.condition of auto removing dead weight. It is easy to fulfill
11.Autotuning for on-site adjustment makes it easy to be adjusted.
12.Having the function of operation parameters auto modification
and fuzzy landing compensation
14.The whole shoot starts from users’ point of view,easy
installation and adjustment,decreasing
15.users’ additional cost in use,high ratio of performance to
Load sensor ECW-GB Install mothed as the pictuer show here: